Change The Time On Your Credit Card Terminal

We have tried to cover the most common terminals in use. Every effort has been made to give accurate directions. There can be slight variations based on processor programming. If yours is not listed or if you do not wish to attempt to do this yourself, please call me and I will be glad to assist.

We also have videos for the VX Series and the PAX Units posted on our website.  Here is a link: VIDEO LINK 

VerifoneVX520  VX510 VX 3750

From Main or credit sale account screen

Press the green button or enter

This should bring you to a Configuration Screen

Press the set up key normally the F2 button

Enter pass word:  One, then the Alpha Key twice then 66831, then enter or green button.

(The Alpha key is just below the screen middle button.)

Press “More Button” far left button under screen until you see Date/Time

Press F1 button, then setting the date comes up.  Being the date is correct; you can press enter to bring up the time.

Note time should be in military time format. I.E. 1:00 pm is 13:00

After the date & time has been enter correctly, press the red key several times to get you back to the main sale screen.

PAX S80 & S90

If prompted for pass word, it is the current date. Format is mmddyyyy

Select “Menu” Key

System Setting should be showing if so select “5”

Date & Time should be showing if so select “1”

Then you will see a listing of the current date and time

Enter current date if what is showing is correct, press enter / green button

Then enter correct time.  Note it is military time, then press enter / green button  

Should bring you back System Setting, press red key to get back to sale screen

FD50 FD100, FD130, FD200 - EMV Application Unity Program

Touch Settings icon at the top right hand corner of the screen

Note For FD50ti is not touch screen so press 0 on key board

Touch or press number 3 to select Date Time

Enter current date in the format of mmddyyyy then press enter

Enter current time.   Note use  military time then press enter

Then you will see the settings menu again, press the red X clear button to return to main screen

FD100 & FD50

From Main or credit sale account screen

Choose “system”, touch the screen

Next screen you should see “date / time”

Choose “date / time” by touching the screen for FD100 for a FD50 choose corresponding number

To take the curser over the time number you want to change use the arrow keys on earthier side of the “zero” of the number pad. Near bottom of terminal

Time should be in military time format. I.E. 1:00 pm is 13:00

Ingenica ICT 220 and ICT 250 

Press the Function key, if it prompts for a password the PW is either 123456P (1234567F) or MW9416557
Then go to 0- Tellium Manager, and then to 3- Initialization
Select 1- Parameters and you will see the date and time prompt. Remember that this terminal runs on military time, and that the time zone must be accounted for 


Ingenico 5100

From Main or credit sale account screen

Select Admin button (below the 9)

Choose 3 setup menu

Choose 1 quick set up

Clock should come up as your first choice.

Select edit and follow prompt by in putting date and time

Note time should be in military time format. I.E. 1:00 pm is 13:00

Verifone Omni 3730, 3740, 3750

From Main or credit sale account screen

Press the green button or enter

This should bring you to a Configuration Screen

Press the set up key normally the F2 button

Enter pass word:  One, then the Alpha Key twice then 66831, then enter or green button.

(The Alpha key is just below the screen middle button.)

Press “More Button” far left button under screen until you see Date/Time

Press F1 button, then setting the date comes up.  Being the date is correct; you can press enter to bring up the time.

Note time should be in military time format. I.E. 1:00 pm is 13:00

After the date & time has been enter correctly, press the red key several times to get you back to the main sale screen.

Omni 3200

From Main or credit sale account screen

Press “More Button” far left button under screen until you see other set up

Press enter at which time a pass word will be required.

Enter pass word:  One, then the Alpha Key twice then 66831, then enter or green button.

(The Alpha key is just below the screen middle button.)

On next screen press “More Button” far left button under screen until you get to date/time

Time should be in military time format. I.E. 1:00 pm is 13:00

Nurit 2085, 8320, Wireless 8000 & 8020

From Main or credit sale account screen

Choose Menu

Scroll down to “systems options”, normally number 5, press enter

The first option to appear should be “Set Time/Date”, press enter

Current date and time should appear, press enter which will allow you to input new info

Note the format it will allow. Example year will only be 2 digit or “10”

Time should be in military time format. I.E. 1:00 pm is 13:00

Hypercom T7P

From Main or credit sale account screen

Choose Function 11, enter

Note if Function 11 does not allow to change time try Function 10 or 12

Pass Word: 0000, enter

Follow prompts.

Time should be in military time format. I.E. 1:00 pm is 13:00

When completed press cancel to exit and go back to the sale screen

Hypercom T7Plus, T4100, T4210 & T4220

From Main or credit sale account screen

Choose Function 10, enter

Note if Function 10 does not allow to change time try Function 11 or 12

Pass Word: 0000, enter

Follow prompts.

Time should be in military time format. I.E. 1:00 pm is 13:00

When completed press cancel to exit and go back to the sale screen

We welcome your comments. If we may be of help to you or your business, please visit our website www.tampabaymerchantservices.com